CYCLE 1: Reel Winding

1. Setting of the total metres to be wound
2. Setting of the initial pitch
3. Piece labelling at the requested metres by means of programmed stop
4. Pre-stop for sorting
5. Storage of warping stops due to broken yarns (control)
6. Winding speed
7. Braking setting and adjustment
8. Constant visualization of the wound metres
9. Setting of overlapping of various warps

The feed adjustments are automatically made with the detection of the wound thickness.
After the setting of the first section, all the others are made according to the same feeding parameters.

CYCLE 2: Beam Window

1. Setting of the constant speed
2. Automatic stops at the set metres during the warping phase
3. Start or exclusion of the zigzag phase
4. Braking setting and adjustment by means with the possibility of range selection
5. Possibility of winding many warping machines on the same beam
6. Possibility of clockwise and/or counter-clockwise beam rotation (slow speed)