Home Page




Warping Plants
¤ Compactronic 2000
¤ Magnum
¤ Creels
¤ Beam rewinder
¤ Rewinder for selvedges
¤ Rewinder for small beams
Equipments for storage
¤ Features
¤ Uses
Giovanelli at ITMA 2007
Hall B5 - Stand 325
Giovanelli will be at ITMA 2007
< Company > < Warping Plants > < Storage Equipment > < Contacts > < Italian >
Motorised Beaming Unit
The alignment of the yarn web, according to the beam, during the beaming phase, is constantly controlled by N.C. which allows the unwinding with a pitch equal to the beam unwinding ones. You can store undetected yarns due to breakages (controls); in this case you have the stop of the beam rotation during the beaming phase.
Motorised Beaming Unit
  • Beam holder spindles complete of lifting device and unloading on the floor
  • Motorised beam holder supports allow the beam centring and facilitate the alignment operation of the beam according to the warp coming from the reel.
The Beaming unit is installed on the back part and driven by an A.C. motor, acted by Siemens Inverter coupled to a reducer with arthogonal axes and equipped with a reverse gear brake (by means of this brake, you remove the yarn loosening during the machine stops.

A horizontal bar positioned along the length of the warping machine and positioned on two sensor contacts connected in series drives the beaming phase.
By lowering the bar the working cycle begins, by lifting it, the beam stops. At the same time, this device is an accident prevention protection during the winding phase. A small pedal with sensor contact, which allows the yarn winding of the first turns at low speed, previously set, completes the rotation beam device.
 
Warp beam lifting and lowering device with motorized control
« back
Giovanelli Sas - Via S. Quasimodo, 25 - 20025 Legnano (MI)
Phone +39 0331577373 - Fax +39 0331579322 - Email: info@giovanelli.com